 |
 |
|
|
Naniwa 10000 Super Stone
| NN-10k01 |
Naniwa Super
Stone (10000) vesikivi (210 x 70 x 10 mm) koos alusega.
|
 |
154.- EUR |
White aluminium oxide abrasive.
This series is particularly suitable for the final polishing of knife
blades.
The hard bond allows a very flat stone with a high polishing effect.
Before use, soak the stones in water for approx. 10 minutes. Do not
keep them in water permanently.
|
|
Naniwa 8000 Super Stone
| NN-8k01 |
Naniwa Super
Stone (8000) vesikivi (210 x 70 x 20 mm) |
|
165.- EUR |
White aluminium oxide abrasive.
This series is particularly suitable for the final polishing of knife
blades.
The hard bond allows a very flat stone with a high polishing effect.
Before use, soak the stones in water for approx. 10 minutes. Do not
keep them in water permanently.
|
|
Naniwa 1000/3000 Combination Stone
| NN-1k3k01 |
Naniwa
(1000/3000) kombineeritud vesikivi (175 x 55 x 25 mm)
|
 |
45.- EUR |
For sharpening and finishing.
White aluminium oxide abrasive.
Naniwa is large manufacturer of sharpening stones in Japan.
The orginal Naniwa stones have a relatively hard bond.
The stones stay flat but offer little abrasion.
Before use, soak them in water for approx. 10 minutes. You can also
store them in water permanently.
|
|
Naniwa 1000 Sharpening Stone, Extra Large
| NN-1k01 |
Naniwa (1000)
vesikivi (233 x 102 x 70 mm), ekstra suur
|
|
120.- EUR |
Ideal for large knives, wide plane blades, drawknives and blades of all
kind.
Naniwa is a large manufacturer of sharpening stones in Japan.
The orginal Naniwa stones have a relatively hard bond.
The stones stay flat but offer little abrasion.
White aluminium oxide abrasive.
Before use, soak them in water for approx. 10 minutes. You can also
store them in water permanently.
|
|
Naniwa DX Sharpening Stones
| NN-DX80001 |
Naniwa (800)
vesikivi (210 x 65 x 32 mm).
|
|
39.- EUR |
| NN-DX1k01 |
Naniwa (1000)
vesikivi (210 x 65 x 32 mm). |
|
42.- EUR
|
| NN-DX1.2k01 |
Naniwa (1200)
vesikivi (210 x 65 x 32 mm). |
|
45.- EUR
|
| NN-DX1.5k01 |
Naniwa (1500)
vesikivi (210 x 65 x 32 mm). |
|
49.- EUR
|
This series is particularly suitable for sharpening knives and tool
edges. The stones have a relatively hard bond, stay flat but offer
little abrasion.
The stones are particularly suitable for high-alloy steels but also for
Japanese carbon steels.
Naniwa®
Naniwa is a large manufacturer of sharpening stones in Japan.
The orginal Naniwa stones have a relatively hard bond. The stones stay
flat but offer little abrasion.
White aluminium oxide abrasive.
Before use, soak them in water for approx. 10 minutes. You can also
store them in water permanently.
|
|
Lisad luiskudele:
Matsunaga sünteetiline Nagura puhastuskivi
| NG-S01 |
Matsunaga
sünteetiline
Nagura puhastuskivi (72 x 23 x 19 mm)
|
|
8.- EUR |
Nagura puhastuskivi kasutatakse luisukivi pinna puhastamiseks ning
poleerpasta tegemiseks.
|
|
Togeru nurgahoidja
| TG-01 |
Togeru
nurgahoidja
|
|
18.- EUR |
Togeru nurgahoidja on mõeldud enamasti kööginugadele.
See on väga lihtsalt kasutatav, lihtsalt kinnita noa turjale ja
kõik ongi kasutamiseks valmis.
Hoidik hoiab tera õige nurga all.
Teritamisel hoia valge keraamiline pind vastu luisukivi.
Niiviisi püsib nurk stabiilne ja liigutused on kontrolli all.
Tera maksimaalne laius: 50 mm.
Tera maksimaalne paksus: 3 mm.
|
|
DMT Libisemiskindel matt
| DMT-NSM01 |
DMT
Libisemiskindel matt
|
|
10.- EUR |
Hoiab luisukivi kindlalt paigas.
Sobib enamusele luisukividest, aga ka muudele teritajatele.
Mõõtmed: 100 x 250 mm.
|
|
Tasandusrest
| TRU-GR01 |
Tasandusrest
|
|
8.- EUR |
Tiheda koega ränikarbiid rest ebaühtlaste luisukivide
tasandamiseks.
Asetage rest tasasele pinnale, ning hõõruge niisket
luisukivi ringikujuliste liigutustega.
Mõõtmed: 140 x 230 mm.
|
|
SteeleX luisukivi hoidja
| ST-D1091 |
SteeleX
luisukivi hoidja
|
|
35.- EUR |
Luisukividele pikkusega 14 cm kuni
20.9 cm (5.5" - 9")
Reljeefsest kummist hoidikud hoiavad luisukivi libisemisest.
Mõõtmed: avatult 220 mm, laius 70 mm.
|
|
Tagasi
|
|
