Suehiro Cerax 1000/3000 Combination Stone
| SH-1k3k01 |
Suehiro Cerax
(1000/3000) kombineeritud vesikivi (183 x 63 x 32 mm) koos nagura kivi
ja alusega.
|
 |
80.- EUR |
For sharpening.
Cerax is the
best-known brand of the Suehiro company. The stones sold under this
name have a medium-hard bond and are particularly suitable for
high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 1000/6000 Combination Stone
| SH-1k6k01 |
Suehiro Cerax
(1000/6000) kombineeritud vesikivi (183 x 63 x 32 mm) koos nagura kivi
ja alusega.
|
|
110.- EUR |
For sharpening and
finishing.
Cerax is the
best-known brand of the Suehiro company. The stones sold under this
name have a medium-hard bond and are particularly suitable for
high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 8000 Honing Stone
| SH-8k01 |
Suehiro Cerax
(8000) vesikivi (206 x 73 x 23 mm) koos nagura kivi
ja alusega.
|
|
169.- EUR |
Ultra fine-grit waterstones for removing burr, polishing and honing.
Cerax is the best-known brand of the Suehiro company. The stones sold
under this name have a medium-hard bond and are particularly suitable
for high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 6000 Honing Stone
| SH-6k01 |
Suehiro Cerax
(6000) vesikivi (206 x 73 x 23 mm) koos nagura kivi
ja alusega.
|
|
129.- EUR |
Fine-grit waterstones for removing burr, polishing and honing.
Cerax is the best-known brand of the Suehiro company. The stones sold
under this name have a medium-hard bond and are particularly suitable
for high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 3000 Sharpening Stone
| SH-3k01 |
Suehiro Cerax
(3000) vesikivi (206 x 73 x 23 mm) koos nagura kivi
ja alusega.
|
|
99.- EUR |
Medium-grit stones for sharpening blunt edges.
Cerax is the best-known brand of the Suehiro company. The stones sold
under this name have a medium-hard bond and are particularly suitable
for high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 1000 Sharpening Stone
| SH-1k01 |
Suehiro Cerax
(1000) vesikivi (206 x 73 x 23 mm) koos nagura kivi
ja alusega.
|
|
95.- EUR |
Medium-grit stones for sharpening blunt edges.
Cerax is the best-known brand of the Suehiro company. The stones sold
under this name have a medium-hard bond and are particularly suitable
for high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro Cerax 400 Coarse Shaping Stone
| SH-40001 |
Suehiro Cerax
(400) vesikivi (206 x 73 x 23 mm) koos nagura kivi
ja alusega.
|
|
66.- EUR |
Coarse-grained stones for abrading large amounts of material.
For repairing nicks and chips, altering the bevel geometry, removing
corrosion etc.
Cerax is the best-known brand of the Suehiro company. The stones sold
under this name have a medium-hard bond and are particularly suitable
for high-alloy tool steels but also for low-alloy carbon steels. The
coarse-grained alloy constituents (e.g. chromium and vanadium) in tool
steels require a stone that wears slowly. The stone with the base has
extra stability and is easy to store. A Nagura stone is used for
cleaning and unclogging the surface of the stone and for creating a
fine polishing paste. White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes, but do
not store them in water permanently.
|
|
Suehiro 1000/3000 Combination Stone
| SH-1k3k02 |
Suehiro
(1000/3000) kombineeritud vesikivi (134 x 40 x 26 mm)
|
|
35.- EUR |
Compact stone for sharpening.
Suehiro is Japanese company which has been producing sharpening stones
for three generations.
The stones from the original Suehiro series have a relatively soft bond
and are thus designed for low-alloy carbon steels (Blue and White Paper
Steel).
White aluminium oxide abrasive.
Before use, soak the stones in water for at least 10 minutes. It is not
recommended to keep them in water permanently.
|
|
